No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IP Routing

IP Routing

OSPF

Procedure

  • Create OSPF.
    1. Choose Configuration > Advanced Services > IP Route > OSPF in the navigation tree to open the OSPF page. Click Create, as shown in Figure 5-94.

      Figure 5-94  OSPF configuration page

      Table 5-50 describes parameters on the page.

      Table 5-50  OSPF parameters

      Parameter

      Description

      Process ID

      Specifies an OSPF process ID.

      Router ID

      Specifies a router ID.

      Always advertise the default route

      Indicates whether the function of advertising default routes into common OSPF areas:
      • ON
      • OFF

      Import external routes

      Imports the routes learned by other routing protocols:
      • Direct route
      • Static route

    2. Set the parameters. Click OK to complete the configuration.
    3. Click More Configurations at the right side of the OSPF List data to open the configuration page. Click Create, as shown in Figure 5-95.

      Figure 5-95  More Configurations

    4. In the Area ID text box, enter an area ID in dotted decimal notation. Click OK.
  • Modify OSPF.
    1. Choose Configuration > Advanced Services > IP Route > OSPF in the navigation tree to open the OSPF page.
    2. In OSPF List, click Modify at the right side of the appropriate data to open the Modify OSPF page, as shown in Figure 5-96.

      Figure 5-96  Modify OSPF

    3. Table 5-50 describes parameters on the page. Modify the parameters as required and then click OK.
  • Delete OSPF.
    1. Choose Configuration > Advanced Services > IP Route > OSPF in the navigation tree to open the OSPF page.
    2. Select a data entry and click Delete. In the dialog box that is displayed, click OK.
  • Update OSPF.
    1. Choose Configuration > Advanced Services > IP Route > OSPF in the navigation tree to open the OSPF page.
    2. Click Refresh to update the OSPF list.

OSPFv3

Procedure

  • Create OSPFv3.
    1. Choose Configuration > Advanced Services > IP Route > OSPFv3 in the navigation tree to open the OSPFv3 page. Click Create, as shown in Figure 5-97.

      Figure 5-97  OSPFv3 configuration page

      Table 5-51 describes parameters on the page.

      Table 5-51  OSPFv3 parameters

      Parameter

      Description

      Process ID

      Specifies an OSPFv3 process ID.

      Router ID

      Specifies a router ID.

      Always advertise the default route

      Indicates whether the function of advertising default routes into common OSPF areas:
      • ON
      • OFF

      Import external routes

      Imports the routes learned by other routing protocols:
      • Direct route
      • Static route

    2. Set the parameters and click OK.
    3. Click More Configurations at the right side of the OSPFv3 List data to open the configuration page. Click Create, as shown in Figure 5-98.

      Figure 5-98  More Configurations

      Table 5-52 describes parameters on the page.

      Table 5-52  OSPFv3 parameters

      Parameter

      Description

      Process ID

      Specifies an OSPFv3 process ID.

      Area ID

      Specifies an area ID.

      Interface Name

      Indicates an OSPFv3 interface. You can click to select an OSPFv3 interface.

      Cost

      Sets a link cost for an interface.

    4. Set the parameters and click OK.
  • Modify OSPFv3.
    1. Choose Configuration > Advanced Services > IP Route > OSPFv3 in the navigation tree to open the OSPFv3 page.
    2. In OSPFv3 List, click Modify at the right side of the appropriate data to open the Modify OSPFv3 page, as shown in Figure 5-99.

      Figure 5-99  Modify OSPFv3

    3. Table 5-51 describes parameters on the page. Modify the parameters as required and then click OK.
  • Delete OSPFv3.
    1. Choose Configuration > Advanced Services > IP Route > OSPFv3 in the navigation tree to open the OSPFv3 page.
    2. Select a data entry and click Delete. In the dialog box that is displayed, click OK.
  • Update OSPFv3.
    1. Choose Configuration > Advanced Services > IP Route > OSPFv3 in the navigation tree to open the OSPFv3 page.
    2. Click Refresh to update the OSPFv3 list.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 88162

Downloads: 114

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next