No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switching to the SVF Mode

Switching to the SVF Mode

This section describes how to switch to the SVF mode.


The web system can change the switch mode between standalone and SVF. The mode switching button is on the top left corner of the web page.
  • is for standalone mode.
  • is for SVF mode.


  1. Click to change the mode.
  2. In the dialog box that is displayed, click OK.

    The SVF configuration page is displayed. Choose Configuration > SVF Quick Config to configure the SVF mode.

Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83512

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next