No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reboot (SVF)

Reboot (SVF)

This section describes how to restart the parent and ASs.

Context

After you specify the system software, configuration file, and patch file for next startup, you must restart the device to make the files take effect. The web system provides two restart modes: immediate restart and scheduled restart. After you restart a device, services will be interrupted; therefore, you need to restart the device when the device is idle. If the device is idle currently, restart the device immediately. If the device is busy processing services, restart the device at a scheduled time when the device is idle.

You are advised to save the current configuration before you restart a device. Otherwise, the configuration may be lost.

The system software and configuration file are for reference only. The actual output information may differ from the preceding information.

Procedure

  • Restart the parent.
    1. Choose Maintenance > System Maintenance > Reboot and click the Parent Reboot tab, as shown in Figure 7-3.

      Figure 7-3  Parent Reboot

      Table 7-3 describes the parameters on the page.
      Table 7-3  Parameters on the Parent Reboot

      Item

      Description

      Reboot Record

      Select a slot ID from the Slot ID drop-down list to display its reboot records.

      Reboot Mode

      Indicates a restart mode. The device supports immediate restart and scheduled restart.

      NOTE:

      The time cannot be longer than 720 hours since the current time.

    2. In the Reboot Mode section, select a restart mode and click Apply. If you select Immediate, a message is displayed, asking whether you want to save the configuration. After you click Save and Reboot, the device restarts immediately and terminates the web connection. If you select Scheduled, enter a specific restart time. The device will restart at the specified time.
  • Restart an AS.
    1. Choose Maintenance > System Maintenance > Reboot and click the AS Reboot tab, as shown in Figure 7-4.

      Figure 7-4  AS Reboot

    2. Select the AS to be restarted and click Reboot.

      NOTE:

      To restart all ASs, click Reboot All.

    3. In the displayed dialog box, click OK.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 86964

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next