No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Notes

Configuration Notes

Support for Web System Functions

Table 1-1 describes the support of different series switches for web system functions.
NOTE:

The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

A hyphen (-) indicates that this function is supported by all switch models.

Table 1-1  Support for web system functions

Function

Subfunction

Switch Models Supporting the Function

Remarks

Monitoring

Summary (Standalone)

-

-

Summary (SVF)

-

Summary is supported only in SVF mode.

User

-

This node is only available in the NAC unified mode.

Topology (SVF)

-

Topology is supported only in SVF mode.

Wired Service (SVF)

-

Wired Service is supported only in SVF mode.

Wireless Service

-

This node is only available in the NAC unified mode.

Configuration

SVF Quick Config (SVF)

-

SVF quick configuration is supported only in SVF mode.

Advanced SVF Config (SVF)

-

Advanced SVF configuration is supported only in SVF mode.

Basic Services

-

-

Advanced Services

-

-

Security Services

-

ACL Config, ACL Reference, AAA, AAA Service App and AAA Profile Mgmt are only available in the NAC unified mode.

Fast WLAN Config (Standalone)

-

This node is only available in the NAC unified mode.

Wireless Services

-

This node is only available in the NAC unified mode.

Diagnosis

Intelligent Diagnosis

-

This node is only available in the NAC unified mode.

Diagnostic Tools

-

Wireless Packet Capturing, RF-Ping, AP-Ping and Interference Detection are only available in the NAC unified mode.

Maintenance

System Maintenance

-

-

AP Maintenance

-

This node is only available in the NAC unified mode.

Network (Standalone)

Role Configuration

-

The network area is available only in the stand-alone mode.

If the topology function is not enabled on the Commander, the Summary, Deployment, and Batch Configuration menus are not available.

Summary

-

Deployment

-

Batch Configuration

-

Power Consumption

-

Use Precautions

When multiple users configure the same device, you need to refresh the current configuration page to obtain the latest information if parameters on this page are modified by another user.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83808

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next