No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Portal Profile

Portal Profile

Context

In Portal authentication, users do not need a specific client. The Portal server provides users with free Portal services and a Portal authentication page.

Procedure

  • Create a Portal profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Portal Profile. The Portal Profile List page is displayed.
    2. Click Create. The Create Portal Profile page is displayed.
    3. Enter the name of the new Portal profile in Profile name.
    4. Click OK. The parameter setting page for creating a Portal profile is displayed, as shown in Figure 9-2.

      Figure 9-2  Parameter setting page for creating a Portal profile

    5. Set parameters for creating a Portal profile. Table 9-6 describes the parameters for creating a Portal profile.

      Table 9-6  Portal profile parameters

      Parameter

      Description

      Portal Profile

      Name of the Portal profile, which cannot be modified.

      Portal authentication

      Portal authentication mode, which cannot be modified.

      Interoperation protocol

      Portal or HTTP used for interoperation.

      This parameter can be set only when Portal authentication is set to External portal server.

      Primary Portal server group

      Name of the primary Portal server profile.

      This parameter can be set only when Portal authentication is set to External portal server.

      Secondary Portal server group

      Name of the secondary Portal server profile.

      This parameter can be set only when Interoperation protocol is set to Portal.

      Authentication mode

      Authentication mode of the Portal profile.

      This parameter can be set only when Portal authentication is set to External portal server.

      Source authentication network segment/mask

      Source subnet for Portal authentication.

      This parameter can be set only when Authentication mode is Layer 3 authentication.

      User reauthentication when the Portal server is available

      The device is enabled to reauthenticate users when the Portal server changes from Down to Up.

      This parameter can be set only when Interoperation protocol is set to Portal.

    6. Click Apply. In the Info dialog box that is displayed, click OK.
  • Modify a Portal profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Portal Profile. The Portal Profile List page is displayed.
    2. Click the Portal profile to modify. The Portal profile configuration page is displayed.
    3. Set parameters for modifying a Portal profile. Table 9-6 describes the parameters for modifying a Portal profile.
    4. Click Apply. In the Info dialog box that is displayed, click OK.
  • Delete a Portal profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Portal Profile. The Portal Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > Portal Profile. The Portal Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87692

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next