No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mesh

Mesh

  • Create an AP group.
    1. Choose Configuration > Fast WLAN Config > Mesh.
    2. Click Create in AP Group List.



    3. Enter the name of the AP group in the displayed window, then click OK.
  • Delete an AP group.
    1. Choose Configuration > Fast WLAN Config > Mesh.
    2. Select the AP group that you want to delete in AP Group List, and click Delete.
    3. Click OK in the displayed window.
  • View AP configuration in an AP group.
    1. Choose Configuration > Fast WLAN Config > Mesh.
    2. Select an AP group in AP Group List, and you can view and manage AP configuration on the right of the page.

Service Settings

Context

This section allows you to configure Mesh parameters for all APs in an AP group.

Procedure

  1. Choose Configuration > Fast WLAN Config > Mesh. In AP Group List, select an AP group, then click the Service Settings tab.



  2. Configure Mesh parameters for all APs in the AP group. For description of the parameters, see Table 5-112.

    Table 5-112  Mesh parameters

    Parameter

    Description

    Mesh role

    Role of a Mesh node.

    • Mesh-Portal: MPP
    • Mesh-node: MP

    Radio

    Radio used by Mesh links.

    • Radio 0: 2.4 GHz
    • Radio 1: 5 GHz
    • Radio 2: 5 GHz

    Mesh ID

    Mesh ID in the Mesh profile.

    Bandwidth

    Operating bandwidth of the radio.

    Radios of different AP nodes on a Mesh link must be configured with the same bandwidth.

    Channel

    Radio channel.

    Radios of different AP nodes on a Mesh link must be configured with the same channel.

    NOTE:
    Set dual channels when Bandwidth is set to 80+80MHz.

    EIRP

    Transmit power of a radio.

    Coverage distance

    Radio coverage distance parameter.

    Antenna gain

    Antenna gain of a radio.

    Security policy

    Security policy in the Mesh profile. Currently, the Mesh profile supports only the security policy WPA2+PSK+AES.

    Key type

    Shared key authentication.

    • PASS-PHRASE: indicates a key phrase.
    • HEX: indicates a hexadecimal number.

    Key

    Authentication key.

    Confirm key

    Indicates the confirm key. The format is the same as that of key.

  3. Configure a Mesh whitelist.

    After the Mesh whitelist is bound to an AP radio, only neighboring APs with MAC addresses in the whitelist can connect to the AP.

    1. Click Edit following Mesh Whitelist.



    2. Configure the Mesh whitelist in the displayed window.

      • To add MAC addresses to the Mesh whitelist, enter AP MAC addresses and click .
      • To delete MAC addresses from the Mesh whitelist, select AP MAC addresses that you want to delete and click .

    3. Click OK.
  4. Click Apply.

AP Manage

Context

In the AP Manage, you can add APs to or delete APs from AP groups.

Procedure

  • Add existing APs to an AP group.

    You can manually set parameters on the web page to add existing APs to an AP group.

    1. Choose Configuration > Fast WLAN Config > Mesh. In AP Group List, select the AP group to which you want to add APs, then click the AP Manage tab.
    2. Click Add. On the page that is displayed, set Mode to Select existing APs.



    3. Select APs that you want to add to the AP group from the list below, and click OK.
  • Manually add APs to an AP group.

    This operation allows you to manually add a maximum of 10 APs offline to an AP group.

    1. Choose Configuration > Fast WLAN Config > Mesh. In AP Group List, select the AP group to which you want to add APs, then click the AP Manage tab.
    2. Click Add. On the page that is displayed, set Mode to Manually add.



    3. Configure AP parameters. For description of the parameters, see Table 5-113.

      Table 5-113  Parameters for manually adding an AP

      Parameter

      Description

      Keyword

      Keyword specified when an AP is manually added, which can be the AP's MAC address or SN.

      AP MAC

      MAC address of the new AP.

      AP ID

      ID of the new AP.

      AP name

      Name of the new AP.

      AP type

      Type of the new AP.

      AP SN

      Serial number of the AP.

      NOTE:

      You can click to add a maximum of 10 APs manually.

    4. Click OK.
  • Import APs using a template.

    This operation allows you to manually add multiple APs offline to an AP group.

    NOTE:

    If AP authentication mode is set to SN authentication, ensure that the AP SNs have been configured when importing APs offline.

    1. Choose Configuration > Fast WLAN Config > Mesh. In AP Group List, select the AP group to which you want to add APs, then click the AP Manage tab.
    2. Click Add. On the page that is displayed, set Mode to Batch import.



    3. Click to download the batch import template to your local computer.
    4. Use the network planning and optimization tool to plan the network parameters and export the planned parameters to the AP information template. Table 5-114 describes the parameters of the AP information template.

      NOTE:

      If you download an AP information template of the Chinese web system under an English Windows operating system (OS), the Chinese characters in the AP information template cannot be displayed. You can choose Start > All Programs > Microsoft Office > Microsoft Office Tools > Microsoft Office 2003 Language Settings in the Windows OS (take Microsoft Office 2003 as an example) and set Primary Editing Language to Chinese(PRC) on the Editing Language tab. After completing the setting, restart the Microsoft Office Excel and open the AP information template. The Chinese characters in the template will be displayed normally.

      Table 5-114  Parameters of the AP information template

      Parameter

      Description

      AP ID

      AP ID. If an AP is imported not for the first time and the MAC address of the AP is not specified, the AP ID is mandatory; otherwise, the AP ID is optional.

      AP Name

      AP name. This parameter is optional.

      AP Type

      AP type. This parameter is optional.

      AP MAC

      MAC address of an AP. If the AP authentication mode is MAC address authentication, AP MAC must be set when the AP is imported for the first time or the AP ID is not specified.

      AP SN

      AP SN. If the AP authentication mode is SN authentication, AP SN must be set when the AP is imported for the first time.

      AP Group

      AP group. This parameter is optional.

      Radio ID

      Radio ID of the AP. This parameter is optional. If you set Channel, Band Width, or Power, Radio ID must be set.

      Channel

      Radio channel of the AP. This parameter is optional. If you set this parameter, Band Width and Radio ID must be set.

      Band Width

      Radio bandwidth of the AP. This parameter is optional. If you set this parameter, Channel and Radio ID must be set.

      Power

      Radio power of the AP. This parameter is optional. If you set this parameter, Radio ID must be set.

    5. Click to select the batch import template, then click Import.
    6. Click OK.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 92621

Downloads: 118

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next