No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Config

AP Config

AP Info

Context

You can view AP information and configure APs on the AP Info page.

Procedure

  • Manually add an AP.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.



    2. Click Create. Set Creation mode to Manually add on the page that is displayed.



    3. Set parameters for the AP. Table 5-122 describes the parameters for manually adding an AP.

      Table 5-122  Parameters for manually adding an AP

      Parameter

      Description

      Keyword

      Keyword specified when an AP is manually added, which can be the AP's MAC address or SN.

      AP MAC

      MAC address of the new AP.

      AP ID

      ID of the new AP.

      AP name

      Name of the new AP.

      AP type

      Type of the new AP.

      AP SN

      Serial number of the AP.

      NOTE:

      You can click to add a maximum of 10 APs.

    4. Click OK.
  • Import AP information from a template.

    Edit an AP information template on your local host and import AP information to the AC from the template.

    Fill in the template with AP information by referring content in the template. Click to select the template and click Import to import AP information.

    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Click Create. Set Creation mode to Batch import on the page that is displayed.



    3. Click to download the AP template to your local host.
    4. Use the network planning and optimization tool to plan the network parameters and export the planned parameters to the AP information template. Table 5-123 describes the parameters of the AP information template.

      NOTE:

      If you download an AP information template of the Chinese web system under an English Windows operating system (OS), the Chinese characters in the AP information template cannot be displayed. You can choose Start > All Programs > Microsoft Office > Microsoft Office Tools > Microsoft Office 2003 Language Settings in the Windows OS (take Microsoft Office 2003 as an example) and set Primary Editing Language to Chinese(PRC) on the Editing Language tab. After completing the setting, restart the Microsoft Office Excel and open the AP information template. The Chinese characters in the template will be displayed normally.

      Table 5-123  Parameters of the AP information template

      Parameter

      Description

      AP ID

      AP ID. If an AP is imported not for the first time and the MAC address of the AP is not specified, the AP ID is mandatory; otherwise, the AP ID is optional.

      AP Name

      AP name. This parameter is optional.

      AP Type

      AP type. This parameter is optional.

      AP MAC

      MAC address of an AP. If the AP authentication mode is MAC address authentication, AP MAC must be set when the AP is imported for the first time or the AP ID is not specified.

      AP SN

      AP SN. If the AP authentication mode is SN authentication, AP SN must be set when the AP is imported for the first time.

      AP Group

      AP group. This parameter is optional.

      Radio ID

      Radio ID of the AP. This parameter is optional. If you set Channel, Band Width, or Power, Radio ID must be set.

      Channel

      Radio channel of the AP. This parameter is optional. If you set this parameter, Band Width and Radio ID must be set.

      Band Width

      Radio bandwidth of the AP. This parameter is optional. If you set this parameter, Channel and Radio ID must be set.

      Power

      Radio power of the AP. This parameter is optional. If you set this parameter, Radio ID must be set.

    5. Click to select the template and click Import to import AP information.
    6. Click OK.
  • Deploy APs.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Select multiple APs and click Deploy.



    3. Set the parameters on the page that is displayed. Table 5-124 describes the parameters for deploying an AP.

      Table 5-124  Parameters for deploying an AP

      Parameter

      Description

      AP group

      AP group to which the AP belongs.

      AP ID

      AP ID.

      AP MAC

      MAC address of the AP, which is the unique identifier of the AP.

      AP Name

      Name of the AP.

      AP Group

      AP Group.

      IP Obtaining Mode

      How the AP obtains an IP address. Options are DHCP/Static.

      IP Address

      IP address assigned to the AP. This parameter is valid only when IP Obtaining Mode is set to Static.

      IP Address Mask

      Subnet mask for the AP. This parameter is valid only when IP Obtaining Mode is set to Static.

      Gateway

      Default gateway address for the AP. This parameter is valid only when IP Obtaining Mode is set to Static.

      WLAN Access Site Code

      The WLAN access site to which an AP or APs in an AP group belong.

      NOTE:
      This parameter is available only when the Paibo plug-in is installed.

      Longitude, Latitude

      The latitude and longitude of an AP is configured.

      Position

      The installation position of an AP.

      NOTE:
      This parameter is available only when the Paibo plug-in is installed.

      Status

      AP status.

    4. Click OK.
    5. In the Warning dialog box that is displayed, click OK.



  • Modify AP deployment parameters.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Click an AP ID in the AP list, and modify AP deployment parameters on the page that is displayed.
  • Replace APs.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Select an AP and click Replace.
    3. Enter the MAC address of the replacement AP in New AP MAC or click and select an AP on the displayed page.
    4. Click OK. On the displayed page, click OK.
  • Delete an AP.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Select an AP and click Delete.
    3. Click OK in the confirm dialog box that is displayed.
  • Add an AP to the blacklist.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Select an AP and click Add to Blacklist.
  • Manage unauthorized APs.

    If AP authentication mode is set to MAC address authentication or SN authentication (configured in AC Configuration) for an AC, the APs out of the whitelist and blacklist of the AC are added to Non-authorized AP List. You can add these APs to the whitelist or blacklist.

    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Click before Non-authorized AP List to expand the unauthorized AP list.
    3. Select unauthorized APs in the list and click Add to MAC Whitelist, Add to SN Whitelist, Add to Blacklist or Refresh.
  • Configure AP specific parameters.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Click an AP ID. On the AP Customized Settings page that is displayed, you can see AP configurations. The digit next to AP customized settings is the AP ID. See Profile for descriptions of the configuration profiles and Table 5-125 for details about the configuration parameters.

      Table 5-125  AP configuration parameters

      Parameter

      Description

      VAP Configuration

      Configures VAPs for APs: adds or removes VAP profiles for APs. After a VAP profile is added for an AP, the AP generates a VAP to implement basic WLAN services.

      For detailed parameters, see Wireless Service.

      Radio Management

      Configures radio parameters for APs, enabling the radios to work at the optimal performance.
      • Regulatory domain profile: configures the country code and DCA parameters for radios.
      • Radio 0/Radio 1/Radio 2: configures parameters for radios.

      For detailed parameters, see Radio Management. Configure radios describes parameters on the Radio 0, Radio 1, and Radio 2 pages.

      AP

      Configures system and interface parameters for APs.
      • AP system profile: configures system parameters for APs.
      • ETH profile/GE profile/ETH-TRUNK profile: configures interface parameters for APs.

      For detailed profile parameters, see AP. See for parameters of the ETH, GE, and ETH-TRUNK profiles.

      Mesh

      Configures the Mesh function for APs.
      • Mesh profile: adds or removes Mesh profiles for AP radios.
      • Mesh whitelist profile: adds or removes Mesh whitelist profiles for AP radios.

      For detailed parameters, see Mesh.

      WDS

      Configures the WDS function for APs.
      • WDS profile: adds or removes WDS profiles for AP radios.
      • WDS whitelist profile: adds or removes WDS whitelist profiles for AP radios.

      For detailed parameters, see WDS.

      WIDS

      Configures the WIDS function for APs.

      For detailed parameters, see WIDS.

      WLAN Location

      Configures the location function for APs.

      For detailed parameters, see WLAN Location.

      Bluetooth Service

      Configures the bluetooth function for AP groups.

      For detailed parameters, see Bluetooth Service.

    3. Click Apply.
  • Configure radios.
    1. Choose Configuration > Wireless Services > AP Config > AP Info. The AP Info page is displayed.
    2. Click an AP ID. The AP Customized Settings page is displayed.
    3. Click ahead of Radio Management. Among the displayed items, click Radio 0, Radio 1, or Radio 2. The radio configuration page is displayed. For detailed parameters, see Table 5-126.



      Table 5-126  Radio parameters

      Parameter

      Description

      Radio 0 Settings (2.4G)/Radio 1 Settings (5G)/Radio 2 Settings (5G)

      Working status

      Whether the radio is enabled or disabled.

      Working mode
      Working mode of APs, which can be:
      • normal
      • monitor

      EIRP

      Transmit power of a radio.

      Channel

      Working bandwidth and working channel of the radio.

      NOTE:
      You must configure both the frequency bandwidth and channel to make the configured bandwidth take effect.
      Antenna gain

      Antenna gain of the radio.

      Coverage distance

      Radio coverage distance.

      Spectrum analysis

      Whether spectrum analysis is enabled on the radio.

      WIDS Control

      Device detection

      Whether the device detection function is enabled on the radio.

      Countermeasure of Unauthorized Devices

      Whether rogue device containment is enabled.

      Attack detection type

      Attack detection type. Multiple options can be selected.

    4. Click Apply.

AP Whitelist

Context

If AP authentication mode is set to MAC address authentication or SN authentication (configured in AC Configuration) for an AC, the APs out of the whitelist and blacklist of the AC are added to Non-authorized AP List. You can add the MAC addresses or SNs of these APs to the whitelist.

Procedure

  • Add AP MAC addresses to the AP whitelist.
    1. Choose Configuration > Wireless Services > AP Config > AP Whitelist. The AP Whitelist page is displayed.
    2. In the MAC Whitelist area, click Create to add AP MAC addresses to the whitelist.

      Manually adding AP MAC addresses

      1. Set Creation mode to Manually add.



      2. Set MAC address. You can click to add a maximum of 10 AP MAC addresses.
      3. Click OK.

      Batch importing AP MAC addresses

      1. Set Creation mode to Batch import.



      2. Click to download the AP template to your local host. Edit the template and save it.
      3. Click select the AP template and click Import.
      4. Click OK.

  • Delete an AP from the MAC address whitelist.
    1. Choose Configuration > Wireless Services > AP Config > AP Whitelist. The AP Whitelist page is displayed.
    2. Select an AP in the MAC Whitelist area and click Delete.
    3. Click OK in the confirm dialog box that is displayed.
  • The operations for the SN whitelist are similar to the preceding operations.

AP Blacklist

Context

If AP authentication is set to MAC address authentication (configured in AC Configuration) for an AC, the APs out of the whitelist and blacklist of the AC are added to Non-authorized AP List. You can add the MAC addresses of these APs to the blacklist.

Procedure

  • Add AP MAC addresses to the AP blacklist.
    1. Choose Configuration > Wireless Services > AP Config > AP Blacklist. The AP Blacklist page is displayed.
    2. Click Create to add AP MAC addresses to the blacklist.

      Manually adding AP MAC addresses

      1. Set Creation mode to Manually add.



      2. Set MAC address. You can click to add a maximum of 10 AP MAC addresses.
      3. Click OK.

      Batch importing AP MAC addresses

      1. Set Creation mode to Batch import.



      2. Click to download the AP template to your local host. Edit the template and save it.
      3. Click select the AP template and click Import.
      4. Click OK.

  • Delete an AP MAC address from the blacklist.
    1. Choose Configuration > Wireless Services > AP Config > AP Blacklist. The AP Blacklist page is displayed.
    2. Select an AP MAC address and click Delete.
    3. Click OK in the confirm dialog box that is displayed.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 92474

Downloads: 117

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next