No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Navigation Tree

Navigation Tree

This section describes submenus and their functions provided by the web system.

The web system consists of five areas: Monitoring, Configuration, Diagnosis, Maintenance, and Network, and provides the following functions: device status overview, interface management, VLAN, DHCP, system management, service management, diagnosis tool, and network deployment.

Table 3-2 lists submenus in the four areas and describes their functions.


The menus and submenus described in this section are used for reference only because the menus of different switch models have slight differences.

Table 3-2  Description of the web system menus





Summary (Standalone)

Display the device panel, system description, switch status, top 5 bandwidth usage, logs, and alarms.

Summary (SVF)

Display SVF brief information and switch status.


Display access user information.

Topology (SVF)

Display level-1 AS topology.

Wired Service (SVF)

Display information about AS and user port group.

Wireless Service


Display radio distribution and information.


Display AP distribution, AP statistics, and wired port statistics.


Display SSID and VAP.


Display mesh links and WDS bridge information.

Potential Risk

Display the STAs receiving poor signals and related radio information.


Display detection information about wireless devices and attacked devices.

Spectrum Analysis

Provide spectrum analysis.


SVF Quick Config (SVF)

SVF Enabling

Configure a standalone switch as the parent.

AS Addition

Add ASs to an SVF and configure Fabric-Port.

AS User-Side Service

Configure services on AS user port group.

AP Addition

Add APs to an SVF.

AP User-Side Service

Configure AP services.

Network-Side Service

Allow users to access the external network.

Advanced SVF Config (SVF)

AS Access Mgmt

Add AS blacklist and whitelist and an AS group to an SVF system.

AS Port Group

Add an AS port group to an SVF system.

AS Profile Mgmt

Add AS profiles to an SVF system.

AS Direct Config

Configure ASs on the parent directly.

Basic Services

Interface Settings

Interface configuration includes the following configuration pages: View Configuration, Connect to PC, Connect to IP Phone, Connect to Switch, Connect to Router, Enable/Disable Interface, Port Loopback Test, and Detect Link.

View Transceiver Info

Display optical module information.


Configure and query VLANs, Modify VLANs, and Delete VLANs.


Configure and query DHCP address pool on VLANIF interface, and DHCP relay.

Static Route

Configure static routes.

Advanced Services

Voice VLAN

Configure voice VLAN.


Query MAC/IP address table, Configure static MAC address entries, Configure static secure MAC address, Configure blackhole MAC address entries, and Delete MAC address entries function.

IP Services

Configure IP services.

IP Route

Configure IP route.


Configure VRRP.


Configure the loopback detection function.


Configure the STP function.


Configure the LLDP function.

IGMP Snooping

Configure IGMP snooping.

MLD Snooping

Configure MLD snooping.


Provide PoE management.


Configure mirroring.


Configure CSS.

Security Services

ACL Config

Configure ACLs.

ACL Reference

Reference ACLs.


Configure AAA.

AAA Service App

Apply AAA.

AAA Profile Mgmt

Provide AAA profile management.


Configure interface ACLs and VLAN ACLs to filter packets.

User Access Control

Configure Authentication Configuration, Portal Server, and Access Configuration to provide security management on the network.

QoS Configuration

Configure QoS.

IP Security

Configure IP security.

Storm Control

Configure storm control.

Port Isolation

Configure port isolation.

Fast WLAN Config (Standalone)


Configure network connections and allow APs to go online.


Configure WLAN service and allow STAs to go online.


Configure the mesh network.

Wireless Services

AC Config

Set CAPWAP parameters and configure radio calibration.

AP Group

Configure AP groups and static load balancing.

AP Config

Add and manage APs.


Configure the WLAN profiles.


Intelligent Diagnosis

Enable intelligent diagnosis for switches, APs, and STAs on WLAN.

Diagnostic Tools

Provide switch maintenance and diagnosis tools.


System Maintenance


Load license files and display license status.

Restart (Standalone)/Reboot (SVF)

Restart the switch.


Upgrade the system software.


Upload, install, and uninstall patches.


Display the latest 300 logs.


Display the latest 300 alarms.


Manage web users.


Manage the system, including files, system time, system information, and factory settings recovery.


Configure the SNMP agent function.

Electronic Label

Display elabel information on the switch.

AS Interface (SVF)

Display AS interface information.

AP Maintenance

AP Upgrade

Upgrade APs.

AP Restart

Restart APs.


Manage AP logs.


Manage AP accounts.

Network (Standalone)

Role Configuration

Determine the role of a device before configuring EasyDeploy on the device.


Displays network topology information and saves the network topology on the device.


Deploy unconfigured devices, replace faulty devices, and perform batch upgrade based on the network topology.

Batch Configuration

Perform batch configuration on the devices by delivering command line scripts to the specified devices.

Power Consumption

Displays power consumption of all the devices on the entire network and of each device.

Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 88213

Downloads: 114

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next