No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interference Detection

Interference Detection


Interference detection information on AP radios helps you locate interference sources, improving AP radio performance.


  1. Choose Diagnosis > Diagnostic Tools > Interference Detection. The Interference Detection page is displayed.

  2. Set interference detection parameters, as described in Table 6-7.

    Table 6-7  Interference detection parameters
    Parameter Description

    AP name

    AP name for interference detection.

    Radio ID

    Radio ID of the AP.

  3. Click Apply.

    After the preceding operations, the detection results are displayed in the interference detection list.

Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84236

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next