No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power status

Power status

The Power status section displays available PoE power and PoE output power and so on.

Context

PoE information can be displayed only for PoE-capable devices.

Procedure

  1. Click Monitoring > Summary, and click on the left of Interface Bandwidth Utilization, Log, Alarm, etc. The Power Status is displayed, as shown in Figure 4-11.

    Figure 4-11  Power Status section

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84134

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next