No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Faulty Device Replacement

Faulty Device Replacement

When a client fails and needs to be replaced, specify file information of this client on the web page. Then the new device can use the specified files to start.

Procedure

  1. Click Network in the function area to display the Network page.
  2. Click Deployment in the navigation tree to display the Deployment page.
  3. Select the faulty device to be replaced. The device information is displayed, as shown in Figure 8-8.

    Figure 8-8  Device information

  4. Click Replace Running File and enter the file information in the displayed page.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83667

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next