No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Account

Account

Context

Unauthorized users may use the default user name and password to log in to APs, causing security risks. To prevent this problem, use Account menu to change the user name and password used to log in to APs.

The default user name and password of an AP are admin and admin@huawei.com, respectively.

Procedure

  • Modify AP account information.
    1. Choose Maintenance > AP Maintenance > Account. The Account page is displayed.
    2. Enter the new user name and password in Modify AP Account. Table 7-29 describes the parameters for modifying AP account information.



      Table 7-29  Parameters for modifying AP account information

      Parameter

      Description

      New user name

      The value is a string of 4 to 31 characters. It can contain letters, underscores, and digits, and must start with a letter.

      New password

      The value is a string of 8 to 32 case-sensitive characters. It must contain at least one uppercase letter, one lowercase letter, and one digit, and cannot contain any question mark (?).

    3. Click Apply.

      The AP user name field then displays the new user name.

  • Restore the default AP account settings.
    1. Choose Maintenance > AP Maintenance > Account. The Account page is displayed.
    2. Click Restore Default Settings.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 92431

Downloads: 116

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next