No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MAC Authentication Profile

MAC Authentication Profile

Context

MAC address authentication controls network access permissions of a user based on the access interface and MAC address of the user. The user does not need to install any client software. The user name and password are the MAC address of the user device. After detecting the MAC address of a user for the first time, a network device starts authenticating the user.

Procedure

  • Create a MAC authentication profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > MAC Authentication Profile. The MAC Authentication Profile List page is displayed.
    2. Click Create. The Create MAC Authentication Profile page is displayed.
    3. Enter the name of the new MAC authentication profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page for creating a MAC authentication profile is displayed, as shown in Figure 9-3.

      Figure 9-3  Parameter setting page for creating a MAC authentication profile

    5. Set parameters for creating a MAC authentication profile. Table 9-7 describes the parameters for creating a MAC authentication profile.

      Table 9-7  MAC authentication profile parameters

      Parameter

      Description

      MAC Authentication Profile

      Name of the MAC authentication profile, which cannot be modified.

      User name mode

      The MAC address or fixed user name is used for authentication.

      MAC address

      Format of the MAC address.

      This parameter is valid when User name mode is set to MAC address.

      MAC address case

      Case of the MAC address, which can be uppercase or lowercase.

      This parameter is valid when User name mode is set to MAC address.

      Password

      Password in MAC address authentication.

      This parameter is valid when User name mode is set to MAC address.

      Fixed user name

      User name for MAC address authentication.

      This parameter is valid when User name mode is set to Fixed user name.

      Authentication password

      Password in MAC address authentication.

      This parameter is valid when User name mode is set to Fixed user name.

    6. Click Apply.
  • Modify a MAC authentication profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > MAC Authentication Profile. The MAC Authentication Profile List page is displayed.
    2. Click the MAC authentication profile to modify. The MAC authentication profile page is displayed.
    3. Set parameters for modifying a MAC authentication profile. Table 9-7 describes the parameters for modifying a MAC authentication profile.
    4. Click Apply.
  • Delete a MAC authentication profile.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > MAC Authentication Profile. The MAC Authentication Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Wireless Service > MAC Authentication Profile. The MAC Authentication Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 92760

Downloads: 118

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next