No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Check

Configuration Check

Context

You can use the one-click configuration check tool to check the version mapping between the AP and switch, RF parameters, network parameters, and common functions. In addition, you can view the possible causes of abnormal items and perform one-click repair.

NOTE:

This object is only available in the NAC unified mode.

Procedure

  1. Choose Diagnosis > Configuration Check. The Configuration Check page is displayed.



  2. Click Start and start the one-click configuration check.
  3. Click Detail and view the cause and suggestion of the alarm or error.
  4. Click Quick Repair and restore the configuration whose check result is alarm or error.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84484

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next