AS Access Mgmt

Procedure

• Create AS blacklist and whitelist.
  1. Choose Configuration > Advanced SVF Config > AS Access Mgmt and click the AS Blacklist And Whitelist tab.
  2. Click Create, as shown in Figure 5-26.
     Figure 5-26  Creating AS blacklist and whitelist
     
     

  3. Set a value for AS MAC Address and select blacklist or whitelist from the Manage drop-down list box.
  4. Click to complete the configuration.
• Delete AS blacklist and whitelist.
  1. Choose Configuration > Advanced SVF Config > AS Access Mgmt and click the AS Blacklist And Whitelist tab.
  2. Select the required blacklist and whitelist and click Delete.
  3. In the dialog box that is displayed, click OK.
• Create an AS group.
  1. Choose Configuration > Advanced SVF Config > AS Access Mgmt and click the AS Group tab.
  2. Click Create and set AS group parameters, as shown in Figure 5-27.
     Figure 5-27  Creating an AS group
     
     
     Table 5-16 describes parameters on the page.

     Table 5-16  Parameters for creating an AS group

     Parameter	Description
     AS Group Name	Specifies the name of an AS group.
     AS Name	Specifies the name of an AS. Click Manage and add the specified AS in the Available AS list to an AS group. NOTE: This parameter is valid only when there is an AS list after you choose SVF Quick Config > AS Addition > Name ASs.
     Administrator Profile	Allows selecting the corresponding administrator profile. NOTE: This parameter is valid only when there is an AS administrator profile list after you choose Advanced SVF Config > AS Profile Mgmt > AS Administrator Profile.

  3. Configure the parameters and click to complete the configuration.
• Delete an AS group.
  1. Choose Configuration > Advanced SVF Config > AS Access Mgmt and click the AS Group tab.
  2. Select the AS group to be deleted and click Delete.
  3. In the dialog box that is displayed, click OK.