No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrade (SVF)

Upgrade (SVF)

This section describes how to upgrade the system software through the web system.


To upgrade the system software of a device, you need to upload upgrade files to the device, specify files for next startup, and restart the device to make the upgrade files take effect. The web system allows you to upgrade the system software on the GUI, simplifying the upgrade operations and improving efficiency.

  • Ensure that the configurations are saved before you upgrade the system software.
  • Do not power off the device during the upgrade.
  • It takes a long time to upload system software to the device; therefore, before upgrading the system software, choose Maintenance > System Maintenance > System > System Info and set HTTP timeout interval (min) to 60 minutes.
  • The system software and configuration file are for reference only. The actual output information may differ from the preceding information.


  • Prepare for a parent upgrade.
    1. Choose Maintenance > System Maintenance > Upgrade and click the Parent Upgrade Preparations tab, as shown in Figure 7-6.

      Figure 7-6  Parent Upgrade Preparations

      Table 7-5 describes the configuration items on the displayed page.

      Table 7-5  Parent Upgrade Page




      Information about system file is displayed on the page, such as Current system file, Next startup software, Current patch file, and Current Web file.

      Upload File

      Selects the file to be uploaded.

      Next Startup Configuration

      Select Next startup system file, Next startup configuration file, and Next startup patch file from the drop-down list.

      If the device supports plug-in, select the plug-in file for next startup from the drop-down list.

    2. Click in the Upload File option. Select an upgrade file and click Upload to upload the file.
    3. In the Next Startup Configuration option, select the file for next startup from the drop-down list and click Save.
    4. Click Apply.
  • Prepare for an AS upgrade.
    1. Choose Maintenance > System Maintenance > Upgrade and click the AS Upgrade Preparations tab, as shown in Figure 7-7.

      Figure 7-7  AS Upgrade Preparations

      Table 7-6 describes the parameters on the page.
      Table 7-6  AS Upgrade Preparations



      Upload the Upgrade File to the Parent Allows you to select the upgrade file to be uploaded. You can upload the locally stored upgrade file to the parent.
      Configure the FTP Account Used to Load the Upgrade File on the AS Configures the FTP account and password.
      Load the Parent's Upgrade File to the AS

      Allows you to select the required upgrade file and patch file based on the AS type. To load files of the parent to the AS or unload files from the AS, click Load or Uninstall.

    2. Click and select the required upgrade file.
    3. Click Upload to upload the upgrade file.
    4. Configure the FTP account and password used to upload the upgrade file of an AS and click Apply.
    5. Select the required upgrade file and patch file based on the AS type and click Load.
    6. In the dialog box that is displayed, click OK.
  • Perform the upgrade.
    1. Choose Maintenance > System Maintenance > Upgrade and click the Upgrade Execution tab, as shown in Figure 7-8.

      Figure 7-8  Upgrade Execution

    2. Select the device to be upgraded and click Upgrade.

      The device will restart automatically for the upgrade.


      To upgrade all devices, click Upgrade All.

Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84364

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next