No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AS Port Group

AS Port Group

This section describes how to add an AS port group to an SVF system.

Procedure

  • Create an AS port group.
    1. Choose Configuration > Advanced SVF Config > AS Port Group.
    2. Click Create, as shown in Figure 5-32.

      Figure 5-32  Creating an AS port group

      Table 5-21 describes parameters on the page.
      Table 5-21  Parameters for creating an AS port group

      Parameter

      Description

      Port Group Name

      Specifies the name of a port group.

      Whether Connected to AP

      Specifies a port type:
      • Yes: indicates a port connected to an AP.
      • No: indicates a port connected to a user.

      Network Basic Profile

      Specifies the name of a network basic profile to be bound to the port group. Click Manage to select the name of the network basic profile to be bound.
      NOTE:

      This parameter is valid only when there is a network basic profile list after you choose Advanced SVF Config > AS Profile Mgmt > Network Basic Profile.

      Network Enhanced Profile

      Specifies the name of a network enhanced profile to be bound to the port group.
      NOTE:

      This parameter is valid only when Whether Connected to AP is set to No and there is a network enhanced profile list after you choose Advanced SVF Config > AS Profile Mgmt > Network Enhanced Profile.

      User Access Profile

      Specifies the name of a user access profile to be bound to the port group.
      NOTE:

      This parameter is valid only when Whether Connected to AP is set to No and there is a user access profile list after you choose Advanced SVF Config > AS Profile Mgmt > User Access Profile.

    3. Configure the parameters and click to complete the configuration.
  • Delete an AS port group.
    1. Choose Configuration > Advanced SVF Config > AS Port Group.
    2. Select the required AS port group and click Delete.
    3. In the dialog box that is displayed, click OK.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83467

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next