No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Plug-in Management

Plug-in Management

Context

Software upgrades can add new functions and services. However, software upgrades are complex and may affect services. To address these problems, you can use the plug-in management function to load the specified modules. This implements online service or function loading.

Procedure

  1. Choose Maintenance > System Maintenance > Plug-in Management to access the Plug-in Management page, as shown in Figure 7-13.

    Figure 7-13  Plug-in Management

    Table 7-11 describes the parameters on the page.

    Table 7-11  Parameters on the plug-in management page

    Item

    Description

    Upload Plug-in

    Allows you to select the plug-in to be uploaded.

    Load Plug-in

    Allows you to select the plug-in to be loaded.

    Plug-in Status

    Indicates plug-in information:

    • Current Plug-in File
    • Version
    • Plug-in Status
    • Action

  2. Click and select the plug-in to be uploaded.

    NOTE:
    • The uploaded plug-in file name extension must be .MOD.
    • The loaded plug-in file version must be the same as the running system software version; otherwise, loading fails.

  3. Select the plug-in to be loaded and click Load.
  4. After the plug-in file is loaded, view the status of loaded plug-in file in the Plug-in Status list.

    To uninstall the plug-in file, click Unload of the corresponding plug-in file or click Unload All to uninstall all plug-in files.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83585

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next