No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Serial Profile

Serial Profile

  • Create a serial profile.
    1. Choose Configuration > Wireless Services > Profile > Serial Profile. The Serial Profile List page is displayed.
    2. Click Create. The Create Serial Profile page is displayed.
    3. Enter the name of the new serial profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new serial profile is displayed.



    5. Set parameters for creating a serial profile. For description of the parameters, see Table 9-32.

      Table 9-32  Parameters for creating a serial profile

      Parameter

      Description

      Serial Profile

      Name of a serial profile, which cannot be modified.

      Baud rate (bps)

      Baud rate of the serial port in an IoT slot.

      Parity check type

      Parity check type of the serial port in an IoT slot.

      Stop bit

      Stop bit of the serial port in an IoT slot.

      Frame format

      Frame format of the serial port in an IoT slot.

      • Fixed frame length: enables packet fragmentation based on fixed frame length.
      • Start and stop flags of fixed-length frames: enables packet fragmentation based on start and stop flags of fixed-length frames.

      Frame length

      Frame length of the serial port in an IoT slot.

      This parameter can be set only when Frame format is set to Fixed frame length.

      Frame start flag

      Frame start flag of the serial port in an IoT slot.

      This parameter can be set only when Frame format is set to Start and stop flags of fixed-length frames.

      Frame end flag

      Frame end flag of the serial port in an IoT slot.

      This parameter can be set only when Frame format is set to Start and stop flags of fixed-length frames.

    6. Click Apply.
  • Modify a serial profile.
    1. Choose Configuration > Wireless Services > Profile > Serial Profile. The Serial Profile List page is displayed.
    2. Click the name of the serial profile that you want to modify. The serial profile configuration page is displayed.
    3. Modify parameters for the Serial profile. For description of the parameters, see Table 9-32.
    4. Click Apply.
  • Delete a serial profile.
    1. Choose Configuration > Wireless Services > Profile > Serial Profile. The Serial Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Clear serial profiles.
    1. Choose Configuration > Wireless Services > Profile > Serial Profile. The Serial Profile List page is displayed.
    2. Click Clear. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > Serial Profile. The Serial Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83665

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next