No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Wired Port Link Profile

AP Wired Port Link Profile

Context

An AP wired port link profile allows you to perform link-layer management and configuration of AP wired interfaces.

Procedure

  • Create an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Click Create. The Create AP Wired Port Link Profile page is displayed.
    3. Enter the name of the new AP wired port link profile in Profile name.

      To copy all parameters from another profile to the new profile, select the name of the profile in Copy parameters from other profiles. If None is selected, parameters are not copied from another profile.

    4. Click OK. The parameter setting page of the new AP wired port link profile is displayed.
    5. Set parameters for creating an AP wired port link profile. Table 9-20 describes the parameters for creating an AP wired port link profile.



      Table 9-20  Parameters for creating an AP wired port link profile

      Parameter

      Description

      AP Wired Port Link Profile

      Name of the AP wired port link profile, which cannot be modified.

      Port

      Whether to enable the AP wired interface.

      LLDP

      Whether to enable LLDP on the AP wired interface.

      Advertise basic TLV type
      Basic TLV that an AP is allowed to advertise in LLDPDUs.
      • All: An AP is allowed to advertise all basic TLVs in LLDPDUs.
      • Management-address: An AP is allowed to advertise Management address TLVs in LLDPDUs.
      • Port-description: An AP is allowed to advertise Port description TLVs in LLDPDUs.
      • System-capability: An AP is allowed to advertise System capability TLVs in LLDPDUs.
      • System-description: An AP is allowed to advertise System description TLVs in LLDPDUs.
      • System-name: An AP is allowed to advertise System name TLVs in LLDPDUs.
      Advertised 802.3 TLV type Standard with which the 802.3 Power via MDI TLV sent by the interface complies.
      Advertised vendor-proprietary TLV type Whether to enable the interface to advertise the Cisco proprietary TLV.
      CRC error alarm

      Whether to enable the alarm function for CRC errors on the AP wired interface.

      CRC error alarm threshold

      Alarm threshold for CRC errors on the AP wired interface.

      CRC error clear alarm threshold

      Clear alarm threshold for CRC errors on the AP wired interface.

      PoE Settings
      PoE Whether to enable the PoE function on the central AP.
      Power supply priority Power priority of PoE interfaces on the central AP.
      Forcible PoE power supply Whether to enable forcible PoE power supply on the central AP's interfaces.
      PD compatibility check Whether to enable PD compatibility check on the central AP.
      PoE power-off time range Effective PoE power-off time range on an interface.

    6. Click Apply.
  • Modify an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Click the name of the AP wired port link profile that you want to modify. The AP Wired Port Link Profile page is displayed.
    3. Modify parameters in the AP wired port link profile. Table 9-20 describes the parameters for modifying an AP wired port link profile.
    4. Click Apply.
  • Delete an AP wired port link profile.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Select the profile that you want to delete and click Delete. In the Confirm dialog box that is displayed, click OK.
  • Display the profile reference relationship.
    1. Choose Configuration > Wireless Services > Profile > AP > AP Wired Port Link Profile. The AP Wired Port Link Profile List page is displayed.
    2. Select the profile of which you want to display the reference relationship and click Display Reference Relationship. The system displays the types and names of the objects that reference the profile.

      NOTE:

      Click Hide Reference Relationship. The system hides the displayed results.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 83644

Downloads: 112

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next