No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Window Layout

Window Layout

This section describes the window layout of and basic operations on the web system.

A typical operation user interface of the web system is shown in the following figure. Figure 3-1 shows the operation user interface.

Figure 3-1  Operation user interface

Table 3-1  Window layout
Number Description
1 Function area. The web system provides five functions: Monitoring, Configuration, Diagnosis, Maintenance, and Network.
2 Navigation tree. The navigation tree lists available configuration items.
3 Status display and operation area. The current status of devices is displayed in this area, and you can perform the operations such as creation, deletion, modification, loading, and searching in this area.

CLI switching area. The CLI window can be invoked in this area and users can manage and maintain devices by running commands in the window.

If you are using Microsoft Internet Explorer, Initialize and script ActiveX controls not marked as safe for scripting must be set to Enable or Prompt. Choose Tools > Internet Options > Security, click Custom level, and set Initialize and script ActiveX controls not marked as safe for scripting to Enable or Prompt. Internet Explorer 8.0 is used in this example.

  • This function is available only when Telnet is enabled in the operating system and the operating system user has the management right.
  • This function only invokes the Telnet client, but cannot check the device connection status.
  • This function is unavailable when the login mode is URL address or device IP address and port mapping.
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 87228

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next