No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AP Upgrade

AP Upgrade

Context

You can upgrade a large number of APs on your network in a batch.

Before upgrading a large number of APs, you can upgrade a single AP to check whether the upgrade version can function properly. If the upgrade is successful, upgrade other APs in batches.

Procedure

  • Configure AP upgrade.
    1. Choose Maintenance > AP Maintenance > AP Upgrade. The AP Upgrade page is displayed, as shown in Figure 7-43.

      Figure 7-43  AP upgrade

    2. Click New Upgrade Task. The configuration page is displayed, as shown in Figure 7-44.

      Figure 7-44  Add an upgrade task

      Table 7-26 lists parameters on the page.
      Table 7-26  Add an upgrade task

      Item

      Description

      Upgrade scope

      Upgrades an AP group or a single AP.

      AP type

      Specifies the type of APs to be upgraded.

      This parameter is available when Upgrade scope is set to AP group.

      AP group

      Specifies the AP group to which the APs to be upgraded belong.

      This parameter is available when Upgrade scope is set to AP group.

      AP name

      Specifies the AP to be upgraded.

      This parameter is available when Upgrade scope is set to Single AP.

      Upgrade file

      Selects the location where the upgrade file is stored.

      • On the AC: An AP downloads the target version file from an AC.
      • On the server: An AP downloads the target version file from a server.

      Select a file

      Specifies the AP upgrade file.

      This parameter is available when Upgrade file is set to On the AC.

      Server type

      Indicates the AP upgrade mode in which APs download upgrade versions from the FTP or SFTP server.

      This parameter is available when Upgrade file is set to On the server.

      Server IP

      Specifies the IP address of the FTP or SFTP server.

      This parameter is available when Upgrade file is set to On the server.

      FTP user name

      Specifies the user name used to log in to the FTP server.

      This parameter is available when Server type is set to FTP.

      FTP password

      Specifies the password used to log in to the FTP server.

      This parameter is available when Server type is set to FTP.

      SFTP user name

      Specifies the user name used to log in to the SFTP server.

      This parameter is available when Server type is set to SFTP.

      SFTP password

      Specifies the password used to log in to the SFTP server.

      This parameter is available when Server type is set to SFTP.

      File name

      Specifies the AP upgrade file.

      This parameter is available when Upgrade file is set to On the server.

      Upgrade mode

      Specifies the AP upgrade mode.

      • Upgrade immediately: After the version file is downloaded to the AP, automatically reset the AP using the new version.
      • Download upgrade file: After the version file is downloaded to the AP, manually upgrade the AP.
      • Scheduled upgrade: After the version file is downloaded to the AP, upgrade the AP in a specified time period.

      Start time

      Specifies the start time of the scheduled AP upgrade task.

      This parameter is available when Upgrade mode is set to Scheduled upgrade.

      End time

      Specifies the end time of the scheduled AP upgrade task.

      This parameter is available when Upgrade mode is set to Scheduled upgrade.

    3. Set the parameters.
    4. Click OK.
    5. Click AP Upgrade File Configuration, and you can view the configured upgrade task.
    6. Select the AP upgrade task to be deleted and click Delete. The system asks you whether to delete the AP upgrade task. Click OK.
  • View the AP upgrade progress.
    1. Choose Maintenance > AP Maintenance > AP Upgrade. The AP Upgrade page is displayed, as shown in Figure 7-43.
    2. Click APs Being Upgraded. The AP upgrade progress is displayed on the page.
    3. Select the AP to be restarted and click Restart. The system asks whether to restart the AP. Click OK.
  • View the scheduled AP upgrade task.
    1. Choose Maintenance > AP Maintenance > AP Upgrade. The AP Upgrade page is displayed, as shown in Figure 7-43.
    2. Click Scheduled Upgrade Tasks. The scheduled AP upgrade task is displayed on the page.
Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84274

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next