No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

S7700 and S9700 V200R011C10

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Patch (SVF)

Patch (SVF)

This section describes how to upload, install, and uninstall patches.

Context

There are two types of patches: cold patch and hot patch. A cold patch takes effect only after the switch restarts and a hot patch takes effect immediately after it is loaded to the switch.

  • A patch is a kind of software compatible with the system software. It is used to remove critical bugs of the system software. The extension name of the patch file is .pat.
  • Before loading patches, you need to save patch files to the storage device of the switch. Patch files are uploaded to the switch using HTTP.
  • After a patch is uninstalled, delete the patch from the memory.

Procedure

  • Manage patches of the parent.
    1. Choose Maintenance > System Maintenance > Patch and click the Parent Patch Management tab, as shown in Figure 7-11.

      Figure 7-11  Parent Patch Management

      Table 7-9 describes the parameters on the page.
      Table 7-9  Parent Patch Management

      Item

      Description

      Upload the Parent Patch Allows you to select the patch file to be uploaded.
      Load a Patch to Parent Allows you to select the patch file to be loaded.
      Parent Patch Status Indicates patch information:
      • Current patch file
      • Version number
      • Status

    2. Click to select the patch file to be uploaded and click Upload.
    3. Select the patch file to be loaded and click Load. The system will display the currently loaded patch file in Parent Patch Status.
  • Manage patches of ASs.
    1. Choose Maintenance > System Maintenance > Patch and click the AS Patch Management tab, as shown in Figure 7-12.

      Figure 7-12  AS Patch Management

      Table 7-10 describes the parameters on the page.
      Table 7-10  AS Patch Management

      Item

      Description

      Upload the Patch File to the Parent Allows you to select the patch file to be uploaded. You can upload the locally stored patch file to the parent.
      Configure the FTP Account Used to Load the Patch File on the AS Configures the FTP account and password.
      Load the Parent's Patch File to the AS

      Allows you to select the required patch file based on the AS type. To load files of the parent to the AS or unload files from the AS, click Load or Uninstall.

      AS Patch Status

      Displays patch status information.

    2. Click and select the required patch file.
    3. Click Upload to upload the patch file.
    4. Configure the FTP account and password used to upload the patch file of an AS and click Apply.
    5. Select the required patch file based on the AS type and click Load.
    6. In the dialog box that is displayed, click OK.

      View patch status information in AS Patch Status.

Translation
Download
Updated: 2019-10-17

Document ID: EDOC1000178323

Views: 84162

Downloads: 112

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next