No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling the Receiving of RIPng Routes

Controlling the Receiving of RIPng Routes

Pre-configuration Tasks

Before controlling the receiving of RIPng routes, configure basic RIPng functions.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ripng [ process-id ]

    The RIPng view is displayed.

  3. Run filter-policy { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } import

    The RIPng process is configured to filter received routes.

    You can use ACL6, route policy and IPv6 prefix lists to filter received RIPng routes, allowing only the routes matching ACL6, route policy and IPv6 prefix lists to be added to RIPng routing tables.

Verifying the Configuration

  • Run the display ripng process-id database [ verbose ] command to check all the active routes in the RIPng database.

  • Run the display ripng process-id route command to check all the RIPng routes learned from other switches.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178324

Views: 206320

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next