No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure Basic IS-IS Functions

Configure Basic IS-IS Functions

Pre-configuration Tasks

Before configuring basic IS-IS functions, configure IP addresses for interfaces to ensure that neighboring nodes are reachable at the network layer.

Configuration Procedure

Creating an IS-IS process is the prerequisite for configuring a network entity title (NET), configuring the device level, and establishing an IS-IS neighbor relationship.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178324

Views: 204993

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next