No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Route Processing on the BGP router

Route Processing on the BGP router

Figure 9-24 shows the route processing on the BGP router. BGP routes can be imported from other protocols or learned from BGP peers. Route summarization can be configured to reduce the routing table size before routes are selected, advertised, and delivered to the IP routing table.

Figure 9-24  Route processing on the BGP router
Table 9-4 lists some key points for Figure 9-24.
Table 9-4  Key points for route processing




BGP can import direct routes, static routes, user network routes, and IGP routes based on the import-route (BGP) or network command configuration.


BGP can use routing polices when importing routes from other protocols, receiving routes from BGP peers, or advertising routes to BGP peers. Routing polices can be used to filter routes or modify route attributes.


BGP supports automatic and manual summarization. Multiple routing policies can be used during manual summarization.


BGP selects routes based on strict route selection rules, which is the key point to be discussed in the following part.


BGP adds the optimal route to the BGP routing table and advertises it to BGP peers.


BGP adds the routes learned from peers and the optimal route in the BGP routing table to the IP routing table for traffic forwarding.

Updated: 2019-10-18

Document ID: EDOC1000178324

Views: 274625

Downloads: 223

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next