No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Specified IS-IS Routes to the IP Routing Table

Adding Specified IS-IS Routes to the IP Routing Table


Only routes in an IP routing table can be used to forward IP packets. An IS-IS route can take effect only after this IS-IS route has been successfully added to an IP routing table.

If an IS-IS route does not need to be added to a routing table, specify conditions, such as a basic ACL, IP prefix, and routing policy, to filter routes so that only IS-IS routes that meet the specified conditions can be added to an IP routing table. IS-IS routes that do not meet the specified conditions cannot be added to the IP routing table and cannot be selected to forward IP packets.


  1. Run system-view

    The system view is displayed.

  2. Run isis [ process-id ]

    The IS-IS view is displayed.

  3. Run filter-policy { acl-number | acl-name acl-name | ip-prefix ip-prefix-name | route-policy route-policy-name } import

    Conditions for filtering IS-IS routes are configured.

Updated: 2019-10-18

Document ID: EDOC1000178324

Views: 273050

Downloads: 222

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next