No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the PrefVal Attribute

Configuring the PrefVal Attribute

Context

The PrefVal attribute is a Huawei proprietary attribute and is valid only on the device where it is configured. When a BGP routing table contains multiple routes to the same destination, BGP prefers the route with the highest PrefVal.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Enter the corresponding address family view based on network type to configure BGP devices on networks.

    • Run ipv4-family { unicast | multicast }

      The IPv4 address family view is displayed.

    • Run ipv6-family [ unicast ]

      The IPv6 address family view is displayed.

  4. Run peer { group-name | ipv4-address | ipv6-address } preferred-value value

    The PrefVal attribute is configured for all the routes learned from a specified peer.

    By default, the PrefVal of a route learned from a peer is 0.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178324

Views: 205191

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next