No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Unicast Routing

S7700 and S9700 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPFv3 GR

Configuring OSPFv3 GR

Applicable Environment

Configure OSPFv3 Graceful Restart (GR) to avoid route flapping and packet loss after an OSPFv3 switch restarts.

After OSPFv3 restarts, the GR restarter and GR helper maintain the neighbor relationship, exchange routing information, synchronize the database, and update the routing table and the forwarding table. This ensures OSPFv3 fast convergence.

Pre-configuration Tasks

Before configuring OSPFv3 GR, configure basic OSPFv3 functions.

Updated: 2019-04-01

Document ID: EDOC1000178324

Views: 224262

Downloads: 195

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next