Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP Route Selection and Load Balancing
Configuration Procedure
Perform the following configuration tasks as required. The following configuration tasks (excluding the task of Verifying the BGP Route Selection and Load Balancing Configuration) can be performed in any sequence. For detailed route selection rules, see BGP Route Selection Rules and Load Balancing.
- Configuring the BGP Priority
- Configuring the Next_Hop Attribute
- Configuring the PrefVal Attribute
- Configuring the Default Local_Pref Attribute
- Configuring the AS_Path Attribute
- Configuring the MED Attribute
- Configuring the BGP Community Attribute
- Configuring BGP Load Balancing
- Verifying the BGP Route Selection and Load Balancing Configuration