License Control Items

S1720, S5700, and S6700 Series Switches License Usage Guide (V200)

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

The basic software license is the license for the basic functions of the software. The license is a permanent license with no control items. It has been installed and activated on the device before delivery, removing the need to manually activate it.

You can run the display license command to view the license control items (for example, IPv6 function) that have been loaded to the device.

Table 3-1 Basic software license control items supported by the device

Part Number	License Control Item	External Model
88037BNQ	S67XX-S Series Basic SW,Per	L-MLIC-S67S
88037BNN	S67XX-H Series Basic SW,Per	L-MLIC-S67H
88037BNM	S57XX-L Series Basic SW,Per	L-MLIC-S57L
88037BNL	S57XX-S Series Basic SW,Per	L-MLIC-S57S
88037BNJ	S57XX-H Series Basic SW,Per	L-MLIC-S57H
88037AJM	S67XX-H-Z Series Basic SW,Per	S67H-Z-M-Lic
88037AJK	S57XX-H-Z Series Basic SW,Per	S57H-Z-M-Lic
88034FAF	S6700 Basic SW,Electronic	ES5SBSM20006
88034ESC	S5700 Basic SW,Electronic	ES5SBSM20005

Table 3-2 Function license control items supported by different models

Part Number	License Control Item	External Model	Product Model and Minimum Version	Before License Activation	After License Activation
81400966	WEB management to full management Electronic RTU License (with the S1720GW-E and S1720GWR-E used)	ES1SWEBF0000	S1720GW-E, S1720GWR-E: V200R010	For the S1720GW-E and S1720GWR-E, the license needs to be loaded only during device manufacturing. Users do not need to purchase or activate the license. If the license is not activated before delivery, the device supports only web management and does not support SNMP management and CLI-based configuration.	The license is installed and activated on the device upon delivery. The device supports web management, SNMP management, Telnet and STelnet login, and CLI-based configuration. For details about the command lines supported by the device, see the Command Reference of the corresponding version. NOTE: The license is not sold separately and never expires. If your license becomes invalid due to misoperations, restore the license by referring to The License of the S1720GW-E, S1720GWR-E, S1720X-16XWR-E, or S1720X-32XWR-E Becomes Invalid Due to Misoperations.
81401055	WEB management to full management Electronic RTU License (with the S1720-10GW used)	ES1SWEBS0001	S1720-10GW: V200R010	The device supports only web management and does not support SNMP management and CLI-based configuration.	The device supports web management, SNMP management, Telnet and STelnet login, and CLI-based configuration. NOTE: The license takes effect only after the switch is restarted.
81401056	WEB management to full management Electronic RTU License (with the S1720-28GWR used)	ES1SWEBS0002	S1720-28GWR: V200R010
81401057	WEB management to full management Electronic RTU License (with the S1720-52GWR used)	ES1SWEBS0003	S1720-52GWR: V200R010
81400993	WEB management to full management Electronic RTU License (with the S1720X and S1720X-E used)	ES1SWEBS0000	S1720X: V200R011 S1720X-E: V200R011	For the S1720X-E, the license needs to be loaded only during device manufacturing. Users do not need to purchase or activate the license. If the license is not activated before delivery, the device supports only web management and does not support SNMP management and CLI-based configuration. Upon delivery, the device has the license installed and activated, and supports web management, SNMP management, and CLI-based configuration. For the S1720X, users can purchase and activate the license. If the license is not activated, the device supports only web management and does not support SNMP management and CLI-based configuration.	The device supports web management, SNMP management, Telnet and STelnet login, and CLI-based configuration. NOTE: This license is not sold separately to the S1720X-E and never expires. If your license becomes invalid due to misoperations, restore the license by referring to The License of the S1720GW-E, S1720GWR-E, S1720X-16XWR-E, or S1720X-32XWR-E Becomes Invalid Due to Misoperations. For the S1720X, the license takes effect only after the switch is restarted.
81400654	SVF Function License	ES5SSVFF0000	S5720-HI: V200R007 S5730-HI: V200R012	The SVF function is not supported.	The function is available.
81400858	SVF Function License	ES6SSVFF0000	S6720-EI, S6720S-EI: V200R009 S6720-HI: V200R012	The SVF function is not supported.	The function is available.
81401080	VXLAN Enhanced Function License	ES5SVXLAN000	S5720-HI, S5730-H: V200R012	The BGP EVPN and distributed gateway functions are not supported.	The BGP EVPN and distributed gateway functions are license controlled. The switches support the functions once the corresponding license is purchased.
81401081		ES6SVXLAN000	S6720-EI, S6720S-EI, S6720-HI: V200R012
81401371		L-VxLAN-S57	S5731-S, S5731S-S, S5731-H, S5731S-H, S5732-H: V200R019C00
81401368		L-VxLAN-S67	S6730-H, S6730-S, S6730S-S: V200R019C00 S6730S-H: V200R019C10 S6735-S: V200R021C00
81401192	1-year intelligent video O&M license	ES5SIVOM0000	S5720I-SI: V200R013C00 S5735S-L-M: V200R019C00 S5735-S-I, S5735S-S24T4X-A, S5735S-S48T4X-A, S5735S-S24P4X-A, S5735S-S48P4X-A, S5735S-L48T4S-MA: V200R019C10	eMDI data and ARP snooping data cannot be sent to eSight.	eMDI data and ARP snooping data can be sent to eSight. The validity period of this function depends on the license purchased.
81401193	3-year intelligent video O&M license	ES5SIVOM0001
81401194	5-year intelligent video O&M license	ES5SIVOM0002
81401661	MPLS Function License	L-MPLS-S57	S5731-S: V200R022C00	The function can be configured, but cannot take effect.	The function is available.
81401662	MPLS Function License	L-MPLS-S67	S6730-S: V200R022C00	The function can be configured, but cannot take effect.	The function is available.

Table 3-3 Resource license control items supported by different models

Part Number	License Control Item	External Model	Product Model and Minimum Version	Before License Activation	After License Activation
82400591	FIBv4 Resource License-128K	ES5SF4128K00	S5720-HI: V200R006 S5730-HI: V200R012	For the default specifications, contact Huawei local office.	The number of resources depends on licenses. For the maximum number of IPv4 FIB entries, contact Huawei local office.
82400592	FIBv4 Resource License-512K	ES5SF4512K00	S5720-HI: V200R006
82400587	WLAN Access Controller AP Resource License-512AP	ES5SWL512AP0	S5720-HI: V200R006 S5730-HI: V200R012	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82401017		ES6SWL512AP0	S6720-HI: V200R012
82402084		L-512AP-S57	S5731-H, S5731S-H, S5732-H: V200R019C00
82402080		L-512AP-S67	S6730-H: V200R019C00 S6730S-H: V200R019C10
82400589	WLAN Access Controller AP Resource License-128AP	ES5SWL128AP0	S5720-HI: V200R006 S5730-HI: V200R012	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82401016	WLAN Access Controller AP Resource License-128AP	ES6SWL128AP0	S6720-HI: V200R012	By default, a device supports a maximum of 16 APs.
82400588	WLAN Access Controller AP Resource License-64AP	ES5SWL64AP00	S5720-HI: V200R006 S5730-HI: V200R012	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82401015		ES6SWL64AP00	S6720-HI: V200R012
82402085		L-64AP-S57	S5731-H, S5731S-H, S5732-H: V200R019C00
82402081		L-64AP-S67	S6730-H: V200R019C00 S6730S-H: V200R019C10
82402086	WLAN Access Controller AP Resource License-32AP	L-32AP-S57	S5731-H, S5731S-H, S5732-H: V200R019C00	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82402082	WLAN Access Controller AP Resource License-32AP	L-32AP-S67	S6730-H: V200R019C00 S6730S-H: V200R019C10	By default, a device supports a maximum of 16 APs.
82400590	WLAN Access Controller AP Resource License-16AP	ES5SWL16AP00	S5720-HI: V200R006 S5730-HI: V200R012	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82401014	WLAN Access Controller AP Resource License-16AP	ES6SWL16AP00	S6720-HI: V200R012	By default, a device supports a maximum of 16 APs.
82402087	WLAN Access Controller AP Resource License-1AP	L-1AP-S57	S5731-H, S5731S-H, S5732-H: V200R019C00	By default, a device supports a maximum of 16 APs.	The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.
82402083	WLAN Access Controller AP Resource License-1AP	L-1AP-S67	S6730-H: V200R019C00 S6730S-H: V200R019C10	By default, a device supports a maximum of 16 APs.
81400972	GE to 10G Electronic RTU License	ES5SGE2XGE00	S5720-28P-LI-AC, S5720-28P-PWR-LI-AC, S5720-52P-LI-AC, S5720-52P-PWR-LI-AC: V200R011	The default speed of uplink ports is 1 Gbit/s.	The default speed of uplink ports is 10 Gbit/s. NOTE: The license takes effect only after the switch is restarted.
82402960	SFP 1G to 10G RTU License	L-P1GUPG10G-S57S	S5736-S48S4X-A, S5736-S48S4X-D: V200R020C30	The default speed of downlink ports is 1 Gbit/s.	The default speed of downlink ports becomes 10 Gbit/s after you activate the license and run the assign port-type xge [ slot slot-id \| all ] command and then restart the switch.
81401576	10GE to 25GE RTU License	L-P10GUPG25G-S67H	S6730-H24X4Y4C: V200R021C00	The default speed of downlink ports is 10 Gbit/s.	The default speed of downlink ports becomes 25 Gbit/s after you activate the license and run the assign port-type 25ge [ slot slot-id \| all ] command and then restart the switch.
81401367	40GE to 100GE Electronic RTU License	L-100GEUPG-S67H	S6730-H24X6C, S6730-H48X6C: V200R019C00 S6730S-H24X6C-A: V200R019C10	For the S6730-H24X6C (part number: 02352FSG/02352FSG-001/02352FSG-005/02352FSG-007) and S6730-H48X6C (part number: 02352FSF/02352FSF-003/02352FSF-007/02352FSF-009/02352FSF-011): By default, the license is not loaded on a switch. In V200R013C02, QSFP28 ports are 100GE ports. In V200R019C00 and later versions, QSFP28 ports are 40GE ports. After a switch is upgraded from V200R013C02 to V200R019C00 or a later version, QSFP28 ports are still 100GE ports. You can load a license to change the port rate. To configure QSFP28 ports as 100GE ports, load and activate this license, run the assign port-speed 100ge [ slot slot-id \| all ] or assign port-type 100ge [ slot slot-id \| all ] command, and restart the switch. To restore QSFP28 ports as 40GE ports, run the undo assign port-speed 100ge [ slot slot-id \| all ] or undo assign port-type 100ge [ slot slot-id \| all ] command and restart the switch. In versions earlier than V200R020C00, the command format is assign port-speed 100ge [ slot slot-id \| all ]. In V200R020C00 and later versions, the command format is assign port-type 100ge [ slot slot-id \| all ]. On the S6730S-H24X6C-A, S6730-H24X6C (part number: 02353GFC/02353GFC-001/02353GFC-003/02353GFC-004), and S6730-H48X6C (part number: 02353FWL/02353FWL-003/02353FWL-005/02353FWL-006), the license has been activated and QSFP28 ports on these switches work as 100GE ports. NOTE: When different models of S6730-H series switches set up a stack, the default speed of uplink ports remains unchanged even if this license is loaded on a model that does not support this license control item.
81401504	40GE to 100GE Electronic RTU License	L-100GEUPG-S57H	S5732-H24S6Q, S5732-H48S6Q: V200R020C00	By default, the S5732-H24S6Q and S5732-H48S6Q do not have this license loaded, and QSFP28 ports on these switches are 40GE ports. The QSFP28 ports can work as 100GE ports after you activate the license, run the assign port-type 100ge [ slot slot-id \| all ] command, and restart the switch.
82402721	1GE to 2.5GE Electronic RTU License	L-1GUPG2.5G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 2.5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device. The groups to which ports belong are fixed, which can be queried by running the display device group-speed configuration command.
82402803	1GE to 2.5GE Electronic RTU License	L-1GUPG2.5G-S57S	S5736-S24UM4XC: V200R021C00	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 2.5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402722	1GE to 5GE Electronic RTU License	L-1GUPG5G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402804	1GE to 5GE Electronic RTU License	L-1GUPG5G-S57S	S5736-S24UM4XC: V200R021C00	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402723	1GE to 10GE Electronic RTU License	L-1GUPG10G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 10 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402805	1GE to 10GE Electronic RTU License	L-1GUPG10G-S57S	S5736-S24UM4XC: V200R021C00	This license control item increases the rate of 12 ports in a specified group from 1 Gbit/s to 10 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402724	2.5GE to 5GE Electronic RTU License	L-2.5GUPG5G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 2.5 Gbit/s to 5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402806	2.5GE to 5GE Electronic RTU License	L-2.5GUPG5G-S57S	S5736-S24UM4XC: V200R021C00	This license control item increases the rate of 12 ports in a specified group from 2.5 Gbit/s to 5 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402725	2.5GE to 10GE Electronic RTU License	L-2.5GUPG10G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 2.5 Gbit/s to 10 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402807	2.5GE to 10GE Electronic RTU License	L-2.5GUPG10G-S57S	S5736-S24UM4XC: V200R021C00	This license control item increases the rate of 12 ports in a specified group from 2.5 Gbit/s to 10 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.
82402726	5GE to 10GE Electronic RTU License	L-5GUPG10G-S57H	S5732-H24UM2CC and S5732-H48UM2CC: V200R019C10	This license control item increases the rate of 12 ports in a specified group from 5 Gbit/s to 10 Gbit/s. To increase the port rate, activate the license file, run the assign group-speed [ slot slot-number ] group group-number speed command, and restart the device.

Translation

简体中文

Download

Updated: 2023-04-21

Document ID: EDOC1000178326

Downloads: 3030

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

Enterprise

Huawei Cloud

Carrier

Consumer

Corporate

Related Version

Related Documents

Digital Signature File