No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S9300, S9300E, and S9300X V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using an ACL to Filter OSPF Routes

Using an ACL to Filter OSPF Routes

An ACL can be applied to various dynamic routing protocols to filter advertised and received routes.

In Figure 1-9, the network runs the Open Shortest Path First (OSPF) protocol. SwitchA receives routes from the Internet and advertises the routes to the OSPF network. The OSPF network is allowed to access only three network segments: 172.16.17.0/24, 172.16.18.0/24, and 172.16.19.0/24. The network connected to SwitchC is allowed to access only the network segment 172.16.18.0/24.

To meet the preceding requirements, an ACL and a routing policy are configured on SwitchA. This routing policy permits SwitchA to advertise only the routes on network segments 172.16.17.0/24, 172.16.18.0/24, and 172.16.19.0/24 to SwitchB, so that the OSPF network can access only these three network segments. An ACL and a routing policy are also configured on SwitchC. The routing policy permits SwitchC to receive only the route 172.16.18.0/24, so that the network connected to SwitchC can access only the network segment 172.16.18.0/24.

Figure 1-9  Using an ACL to filter OSPF routes

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178410

Views: 126604

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next