No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S9300, S9300E, and S9300X V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Traffic Suppression and Storm Control

Licensing Requirements and Limitations for Traffic Suppression and Storm Control

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Traffic suppression and storm control are basic features of a switch and is not under license control.

Version Requirements

Table 6-1  Products and versions supporting traffic suppression and storm control

Product

Product Model

Software Version

S9300

S9303, S9306, and S9312

V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10

S9300

S9310

V200R010C00, V200R011C10

S9300X

S9310X

V200R010C00, V200R011C10

S9300E

S9303E, S9306E, and S9312E

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

Features supported in different views

Table 6-2 lists the traffic suppression and storm control features supported in the interface and VLAN views.

Table 6-2  Features supported in different views
View Traffic Suppression and Storm Control Features Supported by the Switch
Interface view
  • Traffic suppression for broadcast, unknown multicast, and unknown unicast packets
  • Storm control for broadcast, unknown multicast, and unknown unicast packets
  • Traffic suppression for ICMP packets
VLAN view Traffic suppression for broadcast, unknown multicast, and unknown unicast packets

Difference between Traffic Suppression and Storm Control

Traffic suppression and storm control prevent broadcast storms caused by broadcast, unknown multicast, and unknown unicast packets. However, they use different methods to control traffic:

  • In traffic suppression, rate thresholds are configured for three types of incoming packets on interfaces. The system discards the traffic exceeding the threshold and forwards the traffic within the threshold. In this way, the system limits the traffic rate in an acceptable range. In addition, traffic suppression can block outgoing packets on interfaces.
  • In storm control, rate thresholds are configured for three types of incoming packets only on interfaces. When the traffic exceeds the threshold, the system rejects the packets of this particular type on the interface or shuts down the interface.

For incoming packets of the same type on an interface, you can configure either traffic suppression or storm control.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178410

Views: 125793

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next