No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S9300, S9300E, and S9300X V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Event Reporting Function

Configuring Event Reporting Function

Context

This function sends an event report to the administrator when the rate of packets of a specified protocol sent by an attack source exceeds the configured threshold, so that the administrator can take measures in time to protect the device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cpu-defend policy policy-name

    The attack defense policy view is displayed.

  3. Run auto-defend enable

    Attack source tracing is enabled.

    By default, attack source tracing is enabled.

  4. Configure the event reporting function for attack source tracing.
    1. Run auto-defend alarm enable

      The event reporting function for attack source tracing is enabled.

      By default, the event reporting function for attack source tracing is disabled.

    2. Run auto-defend threshold threshold

      The event reporting threshold for attack source tracing is set.

      By default, the event reporting threshold for attack source tracing is 60 pps.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178410

Views: 130722

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next