No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S9300, S9300E, and S9300X V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Are Some Ping Packets Discarded by the Switch?

Why Are Some Ping Packets Discarded by the Switch?

A ping operation uses ICMP packets. During a ping operation, the switch sends the ICMP packets at the rate below the default CAR to the CPU, and discards the ICMP packets at the rate exceeding the CAR. The switch uses this method to prevent excessive ICMP packets from impacting the CPU.

If some ICMP packets from another device to the local switch are lost, run the display cpu-defend statistics packet-type icmp all command to check ICMP packet statistics on the switch.
<Quidway> display cpu-defend statistics packet-type icmp all
 Statistics on slot 0:
--------------------------------------------------------------------------------
Packet Type          Pass(Packet/Byte)   Drop(Packet/Byte)  Last-dropping-time
--------------------------------------------------------------------------------
icmp                                 0                   0  -
                                     0                   0
--------------------------------------------------------------------------------
The Drop(Packet/Byte) field indicates the number of discarded packets. If many packets are discarded, the CAR cannot meet requirement. Run the car packet-type icmp cir cir-value [ cbs cbs-value ] command to increase the CAR for ICMP packets.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178410

Views: 126593

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next