No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

S9300, S9300E, and S9300X V200R011C10

This document describes the configurations of Security, including ACL, reflective ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, URPF, keychain, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for ARP Security

Licensing Requirements and Limitations for ARP Security

Involved Network Elements

Other network elements are not required.

Licensing Requirements

ARP security is a basic feature of a switch and is not under license control.

Version Requirements

Table 7-4  Products and versions supporting ARP security

Product

Product Model

Software Version

S9300

S9303, S9306, and S9312

V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10

S9300

S9310

V200R010C00, V200R011C10

S9300X

S9310X

V200R010C00, V200R011C10

S9300E

S9303E, S9306E, and S9312E

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • For ARP packets, when rate limiting is configured globally, in a VLAN, or on an interface and rate limiting based on the source MAC address or source IP address is also configured, the smallest rate is used.

  • For ARP Miss messages, when rate limiting is configured globally, in a VLAN, or on an interface and rate limiting based on the source IP address is also configured, the smallest rate is used.

  • When resources are sufficient, DAI can be enabled in a maximum of 64 VLANs.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178410

Views: 125874

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next