No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S9300, S9300E, and S9300X V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Recovering the Configuration File

Example for Recovering the Configuration File

Networking Requirements

As shown in Figure 8-3, a user logs in to the device and finds that some incorrect configurations cause errors in the system. To recover the original configuration, the user downloads the configuration file saved in the TFTP server to the device and specifies the configuration file for next startup.

Figure 8-3  Networking diagram of recovering the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Recover the configuration file backed up on the PC using TFTP.

    Configuration file recovery using TFTP is simple, but there are security risks. In scenarios with high security requirements, configuration file recovery using FTPS, SFTP, or SCP is recommended. The following describes how to recover the configuration file backed up on a PC using TFTP.

  2. Specify the recovered configuration file for next startup.

Procedure

  1. Recover the configuration file backed up on the PC using TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      # Run the tftp command in the user view.

      <Quidway> tftp 10.110.24.254 get backup.cfg config.cfg

  2. Specify the recovered configuration file for next startup.

    <Quidway> startup saved-configuration config.cfg

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178413

Views: 68399

Downloads: 109

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next