No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S9300, S9300E, and S9300X V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Factory Configurations

Setting Factory Configurations

You can restore the factory configuration of the configuration file based on different scenarios.

Restoring the Factory Configuration of a Switch in One-Click Mode

If you want to clear all service configurations and data files, run the following command to restore the factory configuration of a switch in one-click mode.

  1. In the user view, run reset factory-configuration.

    The switch is reset and restored to factory default.

    This command restores the factory configuration of the system configuration file and clears all service configurations and data files of a switch. Exercise caution when running this command.
  2. In the user view, run display factory-configuration reset-result.

    The result of the latest factory default restoration of the switch is displayed.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178413

Views: 71869

Downloads: 110

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next