No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S9300, S9300E, and S9300X V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Device Login Through the Web System (Secure Mode)

Configuring Device Login Through the Web System (Secure Mode)

Pre-configuration Tasks

Before configuring login through the web system (secure mode), complete the following tasks:

  • Configure a reachable route between a terminal and the device.
  • Obtain a digital certificate and private key file from the CA.

Configuration Procedure

The following configuration tasks must be performed in sequence.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178413

Views: 68846

Downloads: 109

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next