No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S9300, S9300E, and S9300X V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why the compare configuration Command Fails to Be Executed?

Why the compare configuration Command Fails to Be Executed?

In the earlier versions of V100R003, the compare configuration command compares the current configuration file with a configuration file saved in the storage device. If the configuration file used for last startup is empty, the compare configuration command fails to be executed. You can use the display startup command to check the configuration. After you configure a device that is powered on for the first time, run the save command to save the configuration and restart the device.

In V100R003 and later versions, the compare configuration command compares the current configuration with the next startup configuration file, so this problem will not occur.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178413

Views: 68492

Downloads: 109

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next