No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S9300, S9300E, and S9300X V200R011C10

This document describes methods to use command line interface and to log in to the device, file operations, and system startup configurations.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Web User and Logging In to the Web System

Configuring a Web User and Logging In to the Web System

Context

A web user account can be configured based on the user name, password, level, and access type. After configuration, you can log in to the web system. Enter the user name and password to log in to a web system.

NOTE:

The default upload/download directory is the root directory. You can modify the upload/download directory by running the corresponding command in the AAA view.

Procedure

  1. Configure a web user.
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run local-user user-name password irreversible-cipher password

      A local user name and a password are configured.

      By default, the local user admin exists in the system, with the password admin@huawei.com.

      NOTE:
      If you have logged in to the device through the CLI and changed the password of the user admin, the changed password takes effect.

    4. Run local-user user-name service-type http

      The access type of the local user is set to HTTP.

      By default, no access type is configured for a local user.

    5. Run local-user user-name privilege level level

      The local user level is set.

      By default, the level of the local user admin is 15 and the user is an administrator.

      Users of level 3 or higher are administrator users and have all operation rights of a web page. Users of level 2 or lower are monitoring users and can perform only ping and tracert operations.

      After logging in to the web system, monitoring users receive a message, showing their current level and prompting them to raise their user level.

      Figure 6-2  Message received by a monitoring user logging in to the web system

  2. Log in to the web system.
    1. Open the web browser on a PC, enter https://IP address in the address box, and press Enter. The web system login page is displayed. Enter the web user name and password and select a language for the web system, as shown in Figure 6-3.

      IP address specifies the device's management IP address, which can be an IPv4 or IPv6 address, depending on the HTTPS service type.

      To ensure compatibility, a user logging in through HTTP is redirected to https://IP address if the user enters http://IP address in the address box.

      Figure 6-3  Web system login page
      NOTE:
      • The operating system required for web system login must be the Windows 7.0, Windows 8.0, Windows 8.1, Windows 10.0, or iOS operating system.
      • To log in to the Web system, you must use Microsoft Edge, Internet Explorer 10.0, Internet Explorer 11.0, Firefox 53.0 to 59.0, or Google Chrome 54.0 to 66.0. If the browser version or browser patch version is not within the preceding ranges, the web page may not be properly displayed. Upgrade the browser and browser patch. In addition, the browser must support JavaScript.
      • When logging in to the web system using the Internet Explorer, ensure that active scripting in the Security tab page is enabled; otherwise, an exception may occur during web system login.
      • The best resolution of the display for web system login is 1316px. If the resolution is less than 1280px, the system displays a prompt message.
      • By default, the earliest SSL version used in SSL policies on the device is TLS1.1. When logging in to the device through the web system, ensure that the SSL version supported by the browser is the same as that supported by the device; otherwise, an exception may occur during web system login. It is recommended that you upgrade the browser based on the displayed page or modify the SSL configuration. Take the Internet Explorer as an example. Choose Tools > Internet Options, and click the Advanced tab to view and select the SSL version.
      • If you use Internet Explorer 8.0 running on Windows XP to log in to the web system, you must configure the RC4 algorithm for the customized SSL cipher suite policy. Otherwise, you will be unable to log in to the web system. To perform this configuration, run the set cipher-suite { tls1_ck_rsa_with_aes_256_sha | tls1_ck_rsa_with_aes_128_sha | tls1_ck_rsa_rc4_128_sha | tls1_ck_dhe_rsa_with_aes_256_sha | tls1_ck_dhe_dss_with_aes_256_sha | tls1_ck_dhe_rsa_with_aes_128_sha | tls1_ck_dhe_dss_with_aes_128_sha | tls12_ck_rsa_aes_256_cbc_sha256 } command.
      • The web system identifies card information based on the Item value in the device's electronic label, but the device hardware driver determines whether to start the device based on the BarCode value. Since the values of BarCode and Item may not be the same, the web system may not read or display the card information.
      • The web system does not support back, forward, and refresh buttons of the browser. You may return to the login page when you use the buttons.
      • If you log in to the Web systems with the same IP address through multiple windows on a browser, only the latest login is saved. If the Web systems have the same IP address and the same port number, the latest login account is displayed on earlier web pages after all the windows are refreshed. If the Web systems have the same IP address but different port numbers, timeout messages are displayed on earlier web pages after all the windows are refreshed.
      • If the software version of the device changes (for example, the device software is upgraded or rolled back), clear the browser cache before using the web system. Otherwise, the web page may be displayed incorrectly.
      • You can click Open Source software Notice to view details of the open source software notice.

    2. Access the password change page of the web system.

      On the web system login page, click GO or press Enter to access the password change page, as shown in Figure 6-4. Change the password and re-log in to the web system as prompted. You can manage and maintain the device after logging in to the web system.

      Figure 6-4  Password change page of the web system
      NOTE:
      • The password change page is displayed during the login process only the first time you log in to the web system.
      • The password change page is also displayed if your password will expire or has expired. To access the web system main page, you must change the password.
      • For security purposes, a password must contain at least two types of the following: lowercase letters, uppercase letters, digits, and special characters (such as ! $ # %). In addition, the password cannot contain spaces or single quotation marks (').

    3. (Optional) Change the default user password.

      If you are logged in as an administrator and the password of the default user admin is admin@huawei.com, the system prompts you to change this password. Figure 6-5 shows the prompt. Click Confirm to display the User Management page on which you can change the password of the default user. Changing this password is recommended to improve security.

      Figure 6-5  Changing the default user
      NOTE:
      • Only when you log in to the web system as an administrator user (level 3 or higher), the dialog box is displayed.

      • A secure password should contain at least two types of the following: lowercase letters, uppercase letters, numerals, special characters (such as ! $ # %). In addition, the password cannot contain spaces or single quotation marks (').

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178413

Views: 68690

Downloads: 109

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next