No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S9300, S9300E, and S9300X V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting OSPF

Resetting OSPF

Context

Running the reset ospf command will tear down the OSPF adjacency relationship between the switches. So, confirm the action before you use the command.

To reset OSPF connections, run the following reset commands in the user view.

Procedure

  • Run the reset ospf [ process-id ] process [ flush-waiting-timer time | graceful-restart ] command in the user view to restart the OSPF process.
Translation
Download
Updated: 2019-10-22

Document ID: EDOC1000178418

Views: 208717

Downloads: 47

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next