Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic OSPF Functions
Applicable Environment
When OSPF is configured on multiple switches in the same area, most configuration data, such as the timer, filter, and aggregation, must be planned uniformly in the area. Incorrect configurations may prevent neighboring switches from exchanging messages or even cause routing information congestion and self-loops.
OSPF configurations performed in interface views take effect regardless of whether OSPF is enabled. These configurations remain in place even if OSPF is disabled.
Previous
