Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv6 IS-IS Route Exchange Control Configuration
Procedure
- Run the display isis lsdb [ { level-1 | level-2 } | verbose | { local | lsp-id | is-name symbolic-name } ] * [ process-id | vpn-instance vpn-instance-name ] command to check IS-IS LSDB information.
- Run the display isis route [ process-id | vpn-instance vpn-instance-name ] ipv6 [ verbose | [ level-1 | level-2 ] | ipv6-address [ prefix-length ] ] * command to check IS-IS routing information.
- Run the display ipv6 routing-table command to check the IPv6 routing table.
Previous
