No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S9300, S9300E, and S9300X V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring OSPFv3 to Filter LSAs in an Area

(Optional) Configuring OSPFv3 to Filter LSAs in an Area

Context

After filtering criteria are set for the incoming or outgoing Type 3 LSAs (Inter-Area-Prefix LSAs) in an area, only the Type 3 LSAs that meet the criteria are received or advertised. This filters unnecessary LSAs, reduces the LSDB size, and increases network convergence.

This function is applicable only to the ABR.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospfv3 [ process-id ]

    The OSPFv3 process view is displayed.

  3. Run area area-id

    The OSPFv3 area view is displayed.

  4. Filter incoming or outgoing Type 3 LSAs in the area.

    • Run the filter { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } import command to filter incoming Type 3 LSAs in the area.

    • Run the filter { acl6-number | acl6-name acl6-name | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name } export command to filter outgoing Type 3 LSAs in the area.

Translation
Download
Updated: 2019-10-22

Document ID: EDOC1000178418

Views: 198463

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next