Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Mesh Group on an NBMA Network
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- (Optional) On an Ethernet interface, run undo portswitch
The interface is switched to Layer 3 mode.
By default, an Ethernet interface works in Layer 2 mode. - Run isis mesh-group { mesh-group-number | mesh-blocked }
The interface is added to a mesh group.
When mesh-blocked is configured on an interface, the interface is blocked and cannot flood LSPs outside. All the interfaces added to a mesh group implement global LSDB synchronization through CSNP and PSNP mechanisms.
Verifying the Configuration
Run the following commands to check IS-IS process statistics.
- display isis statistics [ updated-lsp [ history ] ] [ level-1 | level-2 | level-1-2 ] [ process-id | vpn-instance vpn-instance-name ]
- display isis process-id statistics [ [ [ updated-lsp [ history ] ] [ level-1 | level-2 | level-1-2 ] ] | packet ]
Previous
