No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S9300, S9300E, and S9300X V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the RIP-2 Configuration

Verifying the RIP-2 Configuration

Procedure

  • Run the display rip [ process-id | vpn-instance vpn-instance-name ] command to view the RIP running status and configuration.
  • Run the display rip process-id database [ verbose ] command to view all the active routes in the RIP database.
  • Run the display rip process-id route command to view all RIP routes learned from other devices.
  • Run the display rip process-id interface [ interface-type interface-number ] [ verbose ] command to view information about the RIP interface.
Translation
Download
Updated: 2019-10-22

Document ID: EDOC1000178418

Views: 199685

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next