No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DLDP Working Process

DLDP Working Process

DLDP processes a received DLDP packet as follows:

  1. Authenticates the DLDP packet and discards the DLDP packet if it fails to be authenticated.

  2. Discards the DLDP packet if the interval for sending Advertisement packets in the DLDP packet is different from that on the local device.

  3. Processes the DLDP packet if the packet is authenticated and contains the same Advertisement interval as that configured on the local device.

For details about how DLDP detects unidirectional links, see Unidirectional Link Detection When a Single Neighbor Exists and Unidirectional Link Detection When Multiple Neighbors Exist.

For details about how DLDP processes unidirectional links, see Unidirectional Link Processing. For details about how DLDP recovers a link, see Link Auto-Recovery Mechanism.

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 88083

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next