No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of MAC Swap Loopback Configuration Tasks

Summary of MAC Swap Loopback Configuration Tasks

Local and remote MAC swap loopback tests check Ethernet connectivity and network performance.

Table 7-1 describes the configuration tasks of MAC swap loopback.

Table 7-1  MAC swap loopback configuration tasks

Scenario

Description

Task

Configure local MAC swap loopback

A local MAC swap loopback test checks connectivity and performance of the network between a tester and a tested switch, as well as performance of the tested switch.

Configuring Local MAC Swap Loopback

Configure remote MAC swap loopback

A remote MAC swap loopback test checks connectivity and performance of the network between a tester and a tested switch but does not check performance of the tested switch.

Configuring Remote MAC Swap Loopback

Translation
Download
Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 87895

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next