No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Y.1731 Statistics

Clearing Y.1731 Statistics


Before collecting statistics about Y.1731 packets within a specified period, you must clear the original statistics.

Y.1731 statistics cannot be restored after being cleared. Exercise caution when clearing Y.1731 statistics.


  • Clear statistics about one-way frame delay measurement.

    Run the reset y1731 statistic-type oneway-delay md md-name ma ma-name command in any view.

  • Clear statistics about two-way frame delay measurement.

    Run the reset y1731 statistic-type twoway-delay md md-name ma ma-name command in any view.

Updated: 2019-04-17

Document ID: EDOC1000178423

Views: 87935

Downloads: 23

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next